PT6 Engine Familiarization Crossword

"A" flange attaches the RGB front and rear housings to this case.
How many bearings support the major rotating assemblies.
Ball bearings absorb ___________ loads.
The shaft that is supported by the #1 (ball) and #2 (roller) bearing.
What type of combustion chamber does the PT6 engine Have?
3 axial stages and 1 centrifugal stage.
________________ temperature (T5) is monitored by a cold junction thermocouple system.
Reduces the power turbine speed to a speed suitable for propeller operation.
Constructed from a magnesium or aluminum casting
Protects the engine from ingesting foreign objects
Increases the pressure of the incoming air and delivers it to the combustion section.
The assembly that rotates within the stator assembly
__________ tubes are components of the Gas Generator case that further increases air pressure.
7.7:1
Acronym for the component that prevents compressor stalls below 91% Ng by expelling excess P2.5 compressor air.
The Gas Generator Case forms the main structural component of the engine and provides attachment points for installation to the ______________.
_______________ wash that removes salt and chemical deposits from the compressor to prevent corrosion.
Wash that removes deposits of dirt and restores compressor efficiency.
PT6 engine is considered this type of engine.
Forms the envelope which changes the direction of the combusted gas flow 180 degrees for delivery to the compressor turbine vane ring.
Guides P3 cooling air to the aft face of the Compressor Turbine assembly and Compressor Turbine Blade roots
Compressor turbine blades are retained by this type of serrations.
Extracts 2/3 of the combusted gas energy to drive the compressor rotor.