MSHA Surface Crossword Puzzle

The three most important parts of a fall arrest system are: Self retracting lanyard, full body harness and _________ point
It is your ______________ to identify hazards in your work area.
Mounting and dismounting equipment are the most common types of ______ and falls in mining.
Different parts of your body and different types of hazards require different forms of ______.
The first step in any emergency is __________ the scene for safety.
SDS stands for Safety _______ Sheet
The ___________ system should be capable of holding at least 5000lbs.
Lockout/tagout is a system used to ensure that equipment you have __________ and de-energized to work on remains shut down.
__________ should be removed only by the person who installed them.
Open holes, not wearing seat belts and ___________ labeling are all potential accidents.
Some techniques for avoiding hazards are house keeping, fall arrest system and ___________ protection.
The earth or other conductive material including the human body may make up part of an ___________ circuit.
For a single rescuer when giving chest compressions and breaths during CPR, ___________ chest compressions are given for every tow breaths.
The miner must wear hearing protection when the 8 hour time-weighted average exposure for a worker is _____________ than 85 dBA.
____________ takes all paths to ground or to the neutral conductor, with the greatest current flow rate following the path of least resistance.