At what height is fall protection required?
How many Safety Principles are there in our HSE Policy?
These are a personal protective equipment item used to prevent chemicals from burning your skin?
Management of ___________ is a process used to plan for a newpiece of equipment to ensure it functions properly and all safety devices work.
What is the 3 letter abbreviation for the 9 rules that relate to serious hazards in the workplace.
How many seconds should you take to wash your hands properly according to the CDC?
Chemical information like the hazards, fire pprotection measures, manufacturers name and contact information can be found on what?
What tool can be used to put out a fire?
What does the "O" stand for in our S.T.O.P program?
What color of lock is used by an employee actively performing lockout tagout?
The Workplace Health and Safety (WHS) often referred as ____ Health and Safety
As a business owner there are _____ requirements that you must comply with to ensure your workplace meets WHS obligation
WHS involves the assessment and migration of risks that may impact the health, safety or ____ of those in your workplace
One of the responsibility of an employer is to provide safe _______
One of the responsibly of an ________ is to protect their own health and safety
Anything with the potential to cause injury
The likelihood of this hazard resulting in an injury
One of the step to manage work health and safety risks is to ______ hazards
Codes of _____ are practical guides to achieving the standards of health, safety and welfare required under the Work Health and Safety Act and WHS Regulations in jurisdiction
An employee has a legal duty to _____ with an employer
An employer has a legal duty to provide
There are many hazards in an office such as incorrect workstation set-up, poor lighting, poor layout of furniture and equipment, poor ___________ etc...
One of the hazards when working in an office environment is ________ hazards
A disorder you get from sitting too long in an office
Some of the leading type of disabling office accidents are: falls and slips, _____ and over-exertion, struck by or striking against object and caught in object
The type of basic hazard categories is ______, chemical, biological and ergonomic
Some of the safe work practices are to never stand on the char or table to reach anything. The top of your computer should be at ____ level to avoid neck strain. Use safe lifting practices (bending your knees)
Loose lying cables can cause: tripping hazards, _________ and damage to equipment
If injuries or accident happen you must report all injuries or accident __________
Duties of employers to their employees is to train them, provide protection and maintain a healthy working __________
The control of hazardous energy.
Title of the employee who locks or tags machines or equipment in order to perform servicing or maintenance.
Source of energy with suspended parts or springs.
Source of energy by oil or water pressure.
Lockout tagout involves the use of a specific lock or locks to ____ equipment from all energy sources.
Locks, tags and isolating devices must not be used for other purposes.
A completed tag should have a _____ and reason why the equipment is down.
____ by themselves, may only be used when locks cannot be used and when the employer can demonstrate that a tagout system will provide full employee protection.
When implementing lockout tagout, ____ all affected employees in the work area.
How do you insure that all the energy and hazard sources are off?
____ authorized employee must affix a personal lockout or tagout device to the machine or equipment when work begins and remove it when work is completed.
The municipality must ensure that the _____ employee knows when their lockout device has been removed before they resume work at the facility.
Never attempt a LOTO procedure unless you have been _____.
____ remove a tagout device unless authorized.
Lockout tagout does not apply when a person has ____ control of the plug while doing the work.
Who is responsible for Safety?
Who do you report any safety issues to?
Hearing Protection is required in this Department
F4SS (Audit One) requires no ______________ and drink in the manufacturing areas.
If there is an evacuation, which door do you go out?
A _ _ _ is a document that contains information on the potential hazards (health, fire, reactivity and environmental) and how to work safely with the chemical product.
___________________ pathogens are infectious microorganisms in human blood that can cause disease in humans.
_____________ and Tagout is a safety procedure used to prevent employee injuries while servicing equipment.
Good ____________________________ will reduce accidents.
Report all safety _______________ to your supervisor.
Use the _________________ tools for your job.
Who is responsible to ensure a safe workplace
When to report a work-related injury
Wrist injury associated with computer use
It is imperative to stay ________ during the summer
To prevent slips, trips and _____: take your time, pay attention to where you are going, keep walkways clear of clutter and obstructions.
Never use for egress during an earthquake or fire
These rays cause sunburn
Trips hazards in the workplace
Acronym for using a fire extinguisher
Which is better for the back: pulling or pushing?
HIV and Hepatitis B are considered bloodborne ___________
Necessary accessory when overhead hazards are present
Silicate material regulated by EPA and OSHA
You must take precautions when entering this space
This hazard can be truly shocking
This type of protection is for your lungs
This type of protection is needed when working at height
Spilled liquids create ________ and need to be cleaned up immediately
Reporting unsafe acts and conditions can help prevent ________
_______ refers to protective clothing, helmets, goggles, gloves or other garments and equipment designed to protect employees from injury
Under no circumstances should these be blocked
The practice of following certain rules and procedures to prevent the contamination of food
What must you wear anytime you do work outside?
All areas of the store are clear and free of __________
Avoiding injuries at the workplace through proper_____
This must be done to ensure employee safety when cleaning or repairing a piece of equipment
Creating or controlling a situation rather than just responding to it after it has happened
Where staff meet when we have to evacuate the store.
Avoiding injuries at the workplace through proper_____
Sheet used for information on product usage and spillage is known as _____
What do you page in case of a fire?
The practice of following certain rules and procedures to prevent the contamination of food.
It is a comprehensive plan for providing information on the safe use of hazardous materials in the workplace.
______ is an area of concern with the health, safety and welfare of people in the workplace.
_______ refers to protective clothing, helmets, goggles, gloves or other garments and equipment designed to protect the employees body from injury.
What must you wear anytime you do work outside?
This should always be used when cutting product in departments.
This must be done to ensure employee safety when cleaning or repairing a piece of equipment.
This form must always be filled out when there is any injury in the workplace.
Only _____ that limit blade extensions, are to be used to open boxes/strapping.
Under no circumstances should these be blocked.
All _____must be placed on sturdy wooden pallets and stored individually.
All areas of the store are clear and free of _____.
Primary cause of hand injuries is __________not performing as expected
Work station __________is a critical factor in hand safety
It is essential that employees not expose themselves or others to hazards by removing or avoiding __________
Tools used in the workplace must be substantial and __________
Use the proper __________for the task.
__________ __________ protect your hands from rough surfaces.
__________ __________ __________ prevent or reduce cuts from knives or sharp edges.
Common cause of hand injuries is __________.
Remove __________before using power tools or working on machine
__________ __________ can provide protection from hot objects
Various kinds of __________ __________ __________ prevent contact with chemicals.
Carpal tunnel syndrome results from __________ repetitive work with the hands
__________your fingers and hands is important for your work and quality of life.
There are several practices employers and employees can implement to reduce the risk of hand injury: engineering controls, administrative controls and __________ __________ __________
Always report and treat __________ injuries promptly.
Hand injuries account for 30% of injuries at __________.
The most common type of hand injury is a crushing or __________ injury.
Each year more than 15,000 workers end up in the emergency room as a result of __________ __________ __________ injuries.
Keep your hands of of _________ __________.
Clean and __________ all cuts and abrasions.
They investigate all health and safety accidents
This stamp or Mark ensures that materials and components are the correct standard
What ACT covers the reporting of accidents
Who is theopperative that deals with minor accidents on site
Modern colour of the live wire in a plug
Colour of a 110v scocket
Test for electrical equipment
Elevated platform that can be moved
Act about health and safeyt
Controlls Hazardous substances
A disease that affects the skin
Used to protect aghinst hearing damage
One item that employers must provide on a building site
The most common accident in construction
This is Carried out before a task is undertaken
Produced to put systems in place to counteract hazards
What must you do before changing tooling on power tools
These protect your hands when lifting and carring
Protection for your feet
Protection for your head
These protect your eyes
This ensures your seen on site/workshop
You must be 16 years old to work on a ___________ site
__________ hazards are germs that come from living things
Helps you learn the policies, rules, and procedures to help do your job safely
. Someone who works closely with you on a day-today basis and makes sure you follow safety rules
_____________ Health and Safety Act
A biological hazard often found in hospitals
Someone who helps other people and works without pay
What you do frequently to your hands before working with food
Things that should be followed in order to stay safe
Minor injury that could result from picking up heavy boxes
It is your ______________ to work safely and report hazards
Hand protection needed when working with food, chemicals, etc.
What you do when you don’t understand instructions or if you think your work is unsafe
To avoid a serious shock, this should never be mixed with water
Workplace ___________ Materials Information System (WHMIS)
What you wear in a science lab to protect your eyes from chemicals
When implementing Lockout/Tagout/Tryout, ________ all affected employees in the work area.
Lockout/Tagout/Tryout involves the use of a specific lock or locks to _____ equipment from all energy sources.
Source of energy by oil or water pressure
Source of energy with air pressure
Lockout/Tagout/Tryout procedures are not completed until you have ______ that the machine or process will not start
_____ by themselves, may only be used when locks cannot be used and when the employer can demonstrate that a tagout system will provide full employee protection
Only _________ employees may perform lockout/tagout/tryout procedures
Each lockout device must have a tag attached to identify the _______ of the person that put the lockout device in place
Lockout/Tagout/Tryout is used to isolate hazardous energy sources and to prevent death or _____ to employees
The lockout/tagout/tryout regulations are federal laws that are enforced by _____
Lockout devices cannot be ______ by anyone other than the person that put the lockout device in place
What time period must all lockout/tagout/tryout procedures be inspected/audited
What kind of energy sources must be controlled using lockout/tagout/tryout procedures before work may be performed on a piece of equipment
The employer is responsible for making sure that all of its employees receive adequate _____ concerning the lockout program
Failing to follow lockout/tagout/tryout procedures is a violation of the companies Cardinal Safety Rules, besides death or injury, what else could a consequence be
Which hand should an electrical disconnect switch be tripped with
Parts of a machine that fall or drop when power is lost are affected by this type of potential energy
Rectifiers and capacitors can actually store this form of energy even after power has been disconnected from the machine
Turning flywheels, springs under compression, and cams are all forms of this type of energy
The lockout/tagout/tryout __________ give you the steps that you need to follow in order to safely isolate all hazardous energy sources before working on a machine
__________ allow more than one lock to be applied to an energy isolating device
What must be put back in place before locks/tags, etc can be removed from a machine ready to be put back into service
If you have any questions about the lockout/tagout/tryout procedures for your machine who should you talk to first
All "___________" employees must be notified before a machine is shut down and lockout/tagout/tryout procedures are performed
ACRONIM FOR USING A FIRE EXTINGUISHER
CAUSED BY WORKING TOO CLOSE TO COMPUTER SCREEN
WRIST INJURY ASSOCIATED W/COMPUTER USE
OFTEN CAUSED DUE TO STRESS
CALIFORNIA'S DIVISION OF OCCUPATIONAL SAFETY & HEALTH
WHEN TO REPORT A WORK-RELATED INJURY
WHO IS RESPONSIBLE TO ENSURE A SAFE WORKPLACE
TRIP HAZARDS IN THE WORKPLACE
WHEN OUDOORS NEVER TAKE REFUGE UNDER THESE IN AN EARTHQUAKE
THE AMERICAN RED CROSS ADVOCATES DOING THIS DURING AN EARTHQUAKE
NEVER USE FOR EGRESS DURING AN EARTHQUAKE OR FIRE
IN THE EVENT OF AN EARTHQUAKE, FEED YOUR FAMILY BY HAVING PLENTY OF THESE ON HAND
GOOD IN CASE OF A POWER OUTAGE
COMMON COMPUTER RELATED PAIN
THE "P" IN THE ACRONIM PASS STANDS FOR
THE "A" IN THE ACRONIM PASS STANDS FOR
THE "S" IN THE ACRONIM PASS STANDS FOR
THE SECOND "S" IN THE ACRONIM PASS STANDS FOR
REFRAIN FROM __________INSECT BITES OR STINGS
THESE RAYS CAUSE SUNBURN