MR SIG Crossword

In CMR, each basic measurement is the result of a PAPS, a pair of two successive CPMGs made with opposite polarity. What does ‘A’ in PAPS stands for
Which metal chloride is used to prepare the liquid solution for the CMR Calibration bottle
M in CPMG stands for
10. Of which materials are the capacitors made of which are connected across the input of the antenna in a CMR tool
The definition of this word is “presence of spurious, unwanted oscillations in the echo signal, which can cause the amplitudes and phases of the measured signals to deviate from normal response and hence affect resulting data”
Presence of these ions in the mud or formation causes an issue with the T2 relaxation
In presence of saline mud, the antenna results a drop in this parameter
Larmor frequency is directly related to the permanent magnet field (Bo) by the constant of proportionality known as ___________ ratio
The pore/grain size distribution as a statistical bar chart is obtained by __________ the porosity and T2 logarithmic mean of each bin along the T2 distribution
This force is responsible for creating pressure difference between phases in a reservoir
This metal is used for understanding the capillary pressure curve as the non-wetting phase in laboratory
This term is used to define the phenomenon when adhesive forces are greater than the cohesive forces, the fluid spreads out on the surface
This modelling is the key computation in the MR Scanner tool planner
The constituent viscosity model (CVM), which is responsible for the broad T2 distribution in oil can be associate due to this inherent property
This fluid species has the lowest T1/T2 ratio and is not visible at low field