Description

The science of sound and sound control
The amount of air leaking in and out of a building through cracks in walls, windows and doors
Elastomeric blocks that limits lateral glass movement in the glazing channel, which may result from thermal, seismic, wind load effects, building movement, and other forces that may apply
A polyethylene or polyurethane foam material installed under compression and used to control sealant joint depth, provide a surface for sealant tooling, serve as a bond breaker to prevent three-sided adhesion, and provide an hour-glass contour of the finished bead
In glazing, the bead of compound or sealant applied between a lite of glass or panel and the stationary stop or sight bar of the sash or frame. It is usually the first bead of compound or sealant to be applied when setting glass or panels
In glazing, a bead of compound applied to provide a slanted top surface so that water will drain away from the glass or panel
A migration of a liquid to the surface of a component or into/onto an adjacent material
A curve, bend or other deviation from flatness in glass
Open or closed pockets in a sealant caused by release, production, or expansion of gasses
Application of sealant or compound to the flat surface of some member before placing the member in position, such as the buttering of a removable stop before fastening the stop in place
(v) The application of a sealant to a joint, crack or crevice. (n) A compound used for sealing that has minimum joint movement capability; sometimes called low performance sealant.
Very small cracks in flat glass, usually at the edge
Wire spring devices used to hold glass in rabbeted sash, without stops, and face glazed
A chemical formulation of ingredients used to produce a caulking, elastomeric joint sealant, etc
The appearance of moisture (water vapor) on the surface of an object caused by warm moist air coming into contact with a colder object
Broken glass, excess glass from a previous melt or edges trimmed off when cutting glass to size. Cullet is an essential ingredient in the raw batch in glass-making because it facilitates melting
Tool used in cutting glass
The amount of bending movement of the center of a glass lite perpendicular to the plane of the glass surface under an applied load
Deep, short scratches
In float glass, approximately 1/8" (3 mm) thick
The measurement of hardness of a material. A gauge to measure the hardness of an elastomeric material
Grinding the edge of flat glass to a desired shape or finish
The measure of a surface’s ability to emit long-wave infrared radiation
The molding or bead that holds the lite or panel in place when it is on the exterior side of the lite or panel
Any glazed panel, window, door, curtain wall or skylight unit on the exterior of a building
The period of time that an opening protective assembly will maintain the ability to confine a fire as determined by tests – NFPA 252/ NFPA 257/UL 9/UL 10c/ASTM E 2010/ASTM E 2074.
A protrusion on the edge of a lite of glass
The setting of a lite of glass or panel into a four-sided sash or frame opening containing a recessed "U" shaped channel without removable stop on three sides of the sash or frame and one channel with a removable stop along the fourth side
Insulating glass units with a gas other than air in the air space to decrease the unit’s thermal conductivity (U-value) or to increase the unit’s sound insulating value
A hard brittle substance, usually transparent, made by fusing silicates, under high temperatures, with soda, lime, etc
Defined by ASTM C 1036 on the basis of end use and allowable blemishes
A three-sided, U-shaped sash detail into which a glass product is installed and retained
Glass able to withstand high thermal shock, generally because of a low coefficient of expansion
Sealant applied at the base of a channel, after setting the lite or panel and before the removable stop is installed; one of its purposes being to prevent leakage past the stop
Glazing infills set from the interior of the building
The vertical frame members at the perimeter of the opening
Compound formulated in a degree of firmness suitable for application with a putty knife such as used for face glazing and other sealant applications
Two or more lites (or sheets) of polycarbonate (or acrylic) with an aliphatic urethane interlayer between polycarbonate or acrylic bonded together under heat and pressure

Customize
Add, edit, delete clues, and customize this puzzle.

Yellow Grop

Crossword

Homophones

Crossword

River Landscapes

Crossword

Hentzen Challenge

Crossword

Wearable

Crossword

Frequently Asked Questions

What is a crossword?

Crossword puzzles have been published in newspapers and other publications since 1873. They consist of a grid of squares where the player aims to write words both horizontally and vertically.

Next to the crossword will be a series of questions or clues, which relate to the various rows or lines of boxes in the crossword. The player reads the question or clue, and tries to find a word that answers the question in the same amount of letters as there are boxes in the related crossword row or line.

Some of the words will share letters, so will need to match up with each other. The words can vary in length and complexity, as can the clues.

Who is a crossword suitable for?

The fantastic thing about crosswords is, they are completely flexible for whatever age or reading level you need. You can use many words to create a complex crossword for adults, or just a couple of words for younger children.

Crosswords can use any word you like, big or small, so there are literally countless combinations that you can create for templates. It is easy to customise the template to the age or learning level of your students.

How do I create a crossword template?

For the easiest crossword templates, WordMint is the way to go!

Pre-made templates

For a quick and easy pre-made template, simply search through WordMint’s existing 500,000+ templates. With so many to choose from, you’re bound to find the right one for you!

Create your own from scratch

  • Log in to your account (it’s free to join!)
  • Head to ‘My Puzzles’
  • Click ‘Create New Puzzle’ and select ‘Crossword’
  • Select your layout, enter your title and your chosen clues and answers
  • That’s it! The template builder will create your crossword template for you and you can save it to your account, export as a word document or pdf and print!

How do I choose the clues for my crossword?

Once you’ve picked a theme, choose clues that match your students current difficulty level. For younger children, this may be as simple as a question of “What color is the sky?” with an answer of “blue”.

Are crosswords good for students?

Crosswords are a great exercise for students' problem solving and cognitive abilities. Not only do they need to solve a clue and think of the correct answer, but they also have to consider all of the other words in the crossword to make sure the words fit together.

Crosswords are great for building and using vocabulary.

If this is your first time using a crossword with your students, you could create a crossword FAQ template for them to give them the basic instructions.

Can I print my crossword template?

All of our templates can be exported into Microsoft Word to easily print, or you can save your work as a PDF to print for the entire class. Your puzzles get saved into your account for easy access and printing in the future, so you don’t need to worry about saving them at work or at home!

Can I create crosswords in other languages?

Crosswords are a fantastic resource for students learning a foreign language as they test their reading, comprehension and writing all at the same time. When learning a new language, this type of test using multiple different skills is great to solidify students' learning.

We have full support for crossword templates in languages such as Spanish, French and Japanese with diacritics including over 100,000 images, so you can create an entire crossword in your target language including all of the titles, and clues.