Weld Definitions 2 Crossword

point as shown in a cross section, at which the back of the weld intersects the base metal surfaces
exposed surface of a weld on the side from which the welding was done
weld discontinuity in which fusion did not occur
weld used to close the gap between two surfaces to prevent moisture from entering the area
an increment of a weld pass with one start and one stop
angle formed between the prepared edge of a member and a plane perpendicular to the surface of the member
the amount in degrees that two joint members are misaligned from a common plane
void or open hole that extends through a backing ring, strip, bar, fused root or adjacent metal resultig from through thickness melting
total included angle of the grove between pieces to be welded
rejectable condition that exists when the bse metal overhangs the side wall(s) of an excavation preventing accessibility forr welding
internal planar discontinuity in plate metal consisting of oxides, sulfides, etc.and is caracterized by layering and reasonable parallelness to the plate surface
portion of the groove face adjacent to the joint root
surface profile of a weld in the as-welded condition prepared to meet workmanship or NDT requirements
Temp or permenent opening in an abutting member to permit the deposition of a sound weld in a joint passing beneath the abutting member
a single stratum of weld consisting of one or more adjacent weld passes
junction between the weld bead being deposited and the adjacent metal- either base metal or previously deposited weld material
condition that exists when the angle formed between weld beads, or ripples on the bead surface, are lesss than 90 degrees
angle formed between the base plate and the toe of the weld and the angle former between adjacent beads of weld must be 90 degrees or greater