GMAW 1 Crossword

What is added to the shielding gas to help spatter keep from sticking to the nozzle?
The shielding gas flow rate must be increased when welding in the vertical, horizontal, or overhead positions to compensate for?
When welding downhill with FCAW it is difficult because the _________ can get in the way of the molten puddle causing porosity.
The three types of transfer are, Spray, Globular and _____________________
To feed the electrode wire through the torch cable , without using gas, the _______________ switch is used.
When the edge of the weld is lower than the surface of the weld it is called _______________.
What wire diameter is most used?
Improper gas coverage results in?
When GMAW, changing the wire feed speed changes the __________________.
With pulsed spray the background current ______________ the arc
Which shielding gas is most commonly used?
Which shielding gas provides more heat?
Which transfer method produces the most heat?
The polarity used with almost all GMAW applications is ____________________.
A flow meter measures _________________?
The distance from the contact tip to the end of the wire is called ________________________.
the distance from the work piece to the end of the wire is called _______________?
The first two numbers on the wire designation tell you ___________________.
GMAW machines are constant _______________.