ADVANCED MICROCONTROLLER CROSSWORD

It is the technique through which a processor can communicate to its associate partners when an appropriate hardware is not available for its purpose. This communication is made possible through the software.
To ensure that a negative fluctuation does not trigger an unwanted downward transition by pulling the input down through VIT−, we must choose minimum.
The SPDT switch can be used as a _______ circuit.
Most of the MSP430’s devices have __________ number of timers in it.
protection from failures to the system is the main function of ______ timer.
_______ bits control the period of the clock.
______ flag gets cleared if the interrupt is serviced.
________ instruction can act as valid BCD addition.
MSP430 describes ______ instruction as Format1 addressing.
The number of repeated closeness to the true value is accounted by______.
The process of reduction of a continuous input to a discrete output is __________.
_________ register used for masking the interrupts flags of the Timer0, Timer1 and Timer2.
Which register is responsible for handling all the external hardware interrupts?
By default, INT0-INT2 interrupts are _______ triggered.
Baud rate is the reverse of the ___________.
____________ is the sampling clock in the oversampling mode.
According to conventions being followed, R12 to R15 are used for _________ passing.
Here the word sigma represents.
A microcontroller can be considered a self-contained system with a processor, memory and peripherals and can be used as an _________________