Tooling Crossword

Tooling that is not good for heavy workloads but used when quick and accurate change overs are necessary.
Sawblade required when primarily cutting against the grain.
Sawblade required when primarily cutting with the grain.
A tool material that is brittle is likely to be...
__________-tipped tools are capable of very heavy workloads.
______cutting tools are very resistant to corrosion.
Hardwoods require a __________ rake angle than softwoods
On circular saw blades, what does the abbreviation ATB stand for?
On circular saw blades, what does the abbreviation TCG stand for?
There are three categories of wood machining. Sawing, Boring and...
A large, thick washer used to reinforce a saw blade is called a
A carbide CNC bit that has a spiral that cuts/shears toward the tool holder.
A carbide CNC bit that has a spiral that directs cutting forces toward the workpiece from the top side
A carbide CNC bit that direct the cutting forces to the center of the workpiece from both sides of the piece, leaving both sides with clean edges.
On a saw blade that is used for chip extraction
On a sawblade, is used for heat control
The space left when grooving a piece of material.
The type of borring bit used on the CNC.
Shallow dents or depressions in the surface caused by inadequate dust extraction are?
What type of blade is used on a radial arm saw for safety reasons?
The cutting of one piece into 2 or more pieces is called?
The S4Sing of material into a certain thickness and width
The drilling of a hole into or through material
2 knives on the same head must weigh the same to ensure the tool is ______________..
Router and boring bits have ____________ speed (rpm) limits.
a gold or orange brad point boring bit rotates___________________.
A black brad point boring bit rotates___________________.
The most dangerous part on a cutterhead as it rotates because it cannot be seen.
wear resistance has to do with 2 things, 1 is hardness the other is?
What is the example for hard but not tough?
What is the example for tough but not havd?
To increase KMPI you must increase the spindle RPM, Increase the # of knives and ________the feed rate.
Tool diameter affects knife mark depth, The greater the _____________head , the shallower the knife mark depth.
Cutting with the rotation of the bit.