Intro Carpentry Crossword
Type
Crossword
Description

Tools mounted to the shop floor
Most important concern in the shop
Tool used for measuring
Tool used for boring holes
What species of wood is used to construct marble game
Handheld tool used for marking a 90 degree angle
PPE requirement for working in shop
Another word for a 90 degree angle
Used to hold wood in place
Cutting wood across the grain
Cutting wood with the grain
Multiple use square
Used as a guide
Worn on the face as PPE
Hand held tool for cutting wood

WoodWork Crossword

WoodWork Crossword
Type
Crossword
Description

Drives nails easily into wood and takes them out of wood
Measures things
You use it when cleaning out mortise joints or to scribe wood
They have sensing plates that scan the wood beneath
You need this to carvers, to clean out joints,and to saw cuts
Means horizontal, and plumb is vertical
Helps put screws in where you need them to be
You use them to drive _____________ into the wood so they are flush or right below the surface
This is adjustable, and you can lock it at the angle you want to mark, making it much more time-savvy to mark multiple angles.
The _____________ is a triangle that you can use to mark square cuts on stock.
You can flatten a piece of wood, add a curve to it, or square your work.
You can even get digital______ now that leave no guesswork as to whether you were inside or outside the line
You’ll need____ for 45 and 90-degree joints, and pipe____ to reach for long stretches
You usually use a___with a power tool, to guide the piece through the saw
Other ___, with their variety of cutting surfaces and angles, will come as the need arises.
Detects metal
They are important for achieving smooth, quality cuts
It can hold up to 500 lbs.
You drill things with this tool
Some_______ have an adjustment knob on each end of the fence, others on just one end.
________features perforated sheet metal and resembles a food grater.
Used for rough cutting shapes in the board, but especially for removing waste from dovetail joints (one of the most common wood joints)
Used for chopping mortises (rectangular holes) into the side of your board for insertion of a tenon.
Used checking the squareness of boards (when planing them to final dimension), scribing dovetail joints, measuring the depth of mortises
Used for taking and repeating a measurement over and over again on a work piece.
Used for transferring a measurement and repeating it over and over again
Used such as trimming tenons & other joinery, cutting rabbets, removing waste for hand cut moldings
Paper with sand or another abrasive stuck to it, used for smoothing or polishing woodwork or other surfaces.
A straight strip or cylinder of plastic, wood, metal, or other rigid material, typically marked at regular intervals, to draw straight lines or measure distances.
A brush for applying paint
A saw with larger teeth (fewer teeth per inch) for cutting with the grain of wood.
Short hand saw with a tapered blade used to cut curves or irregular shapes.
A saw with very fine teeth and is often used in a miter box for cutting angles. The thin blade is reinforced with a ridge of thicker metal along the back of the saw
A tool used for removing material from a surface.
A tool having one end of the head hemispherical and used in working metal.

Hand Tools Crossword

Hand Tools Crossword
Type
Crossword
Description

A tool that fits into a head of a screw to turn it
A type of saw that is reinforced that keeps the thin blade from resorting
A wood saw worked by one hand
Used to prune small trees
Design to smooth out wood
Used to cut or shape wood or stone
A length of tape or thin flexible metal
Used for smoothing or polishing woodwork or other surfaces
Pencil that is rectangular or elliptical to prevent from rolling
Used for braking things or driving in nails
A tool for drawing circles and arcs
Woodworking or metalworking tool used for marking and measuring wood
Triangle shaped used for marking wood or metal
measure diffrent types of angles
to hold wood from moving when cutting
lectrical motor that rotates a replaceable drill bit to make a hole in wood, plastic, or meta
machine that drills wholes
used to cut precise shapes and curves
fine tuning your wood projects
used to guide the piece through the saw

HAND TOOLS Crossword

HAND TOOLS  Crossword
Type
Crossword
Description

IT IS SIZED BY ITS WEIGHT
IT IS USED TO SHAVE WOOD MATERIAL
USED FOR 45, 90 ANGLES, ALSO KNOW AS A RAFTER SQUARE
USED TO PLUMB AN OBJECT
USED TO SECURE MATERIAL
USE TO LAYOUT STEPS AND RAFTERS
USED TO CARVE OUT WOOD
SHAPED LIKE A STAR
USED TO CUT WITH THE GRAIN
USED TO CUT AGAINST THE GRAIN
used on trim
USE TO CREATE ANGLES
USED TO LAYOUT LINES AT 45 AND 90 DEGREES
ALSO CALLED T-SQUARE
USED TO CUT METAL

Power and Energy vocab Crossword

Power and Energy vocab Crossword
Type
Crossword
Description

You can mill your wood with it
You cut wood with it
brad point drill bit drill bit used in basic wood work
a holding device attached to a workbench
a coarse file with sharp pointed projections 
used to remove very fine layer of wood
where joints meet each other
straight flat blade used in carving
pattern of the wood grain
a fixed bar for support
between table legs closer to the bottom used for extra strength and stability
stationary tool that does the same job as a regular drill, at a fixed angle, bit moves up and down, same hole is made each and every time
Layers of wood veneer laid in different directions, glued together under pressure. 
Japanese saw that works with the backward motion of cutting with the saw
a device (used by carpenters) that holds things firmly together
90 degree angle
paper cut out of project to follow by when cutting actual wood.
cut (wood) along the grain
when cutting across the grain of the wood
when the wood begins to turn and warp during the drying process

Woodworking Crossword

Woodworking Crossword
Type
Crossword
Description

protect wood surfaces
make chamfer edges
remove scratches from wood
remove saw marks
make pencil marks to locate holes and cutting
applies finish to wood surface
easily removed fastener
drives in nails
fills in sunken nail heads
trees that have leaves
makes 90 degree or right angle
hold swork for operation
trees that have needles
joins two pieces of wood
measure length
holds work to table

Woodworking Crossword

Woodworking  Crossword
Type
Crossword
Description

opposite of a Dada
used to shape wood
Also used to shape or rough form wood
joint used in bookcases
Soa, DA and _____________ make up Stocks classes.
Type of wood used in your box or table project
used to measure
cutting with the grain
cutting across the grain
ANSI Z87
cutting at 90 degrees
fuel for Stock
Pencil, safetyglasses a safe attitude and____________
making plans
shaker peg holes are drilled with a_______________ bit
sand with the ________ not against
sand paper has ________
before planing you _________the face of your board
what color are pencils
aliphatic resin is another name for
keep all___________ and safety devices in place
used to chop wood
cut wood with a
glue joints are________________ than the wood
a router uses
to remove a drill bit from the drill press a __________ is required

Fixed Machines Crossword

Fixed Machines Crossword
Type
Crossword
Description

direct current
A Flat surface made by removing the edge of a corner
A drill bit is held by this in the drill
An activity that has the potential to cause harm
Cutting timber with the grain
Cutting timber at 90 degrees to the grain
Residual current device
Two levels of insulation built into a portable machine
The external covering on a building or fence
You are not allowed to cause **** to another person
Wooden material that the saw stool was made from
Cut a slanting edge on a piece of wood
The helical grooves of a twist drill
An isometric angle
The measure of a turning force
Personal protective equipment
A hand held tool that produces a flat surface
A hand held tool that applies impacting force to an object
Stick used instead of fingers or hand when feeding work through a saw

Hand Tools Crossword

Hand Tools Crossword
Type
Crossword
Description

Is used to drive a nail into a board
Is used to smooth the edge of a board.
Is used to file wood
Was used before electric drill, to drill holes in wood.
Is used to set the nail head below the surface of the wood.
Is used to either crosscut or rip a board.
Is used to drive a slotted screw into a board.
Is used to drive a screw with a slot that looks like a plus sign.
Is used to boar a hole into wood.
Is used to make sure that two boards make a perfect 90 degree angle.
Used to chisel away wood.
Is a pair of pliers that clamps down on the project.
Is a clamp that is in the shape of a "C".
A saw that is used to cut metal.
A pair of scissors used to cut sheet metal.
The only hammer that is used with chisels.
A measuring device used in the shop.
Must always be worn in the shop.
Is used for sanding your project
Used to take two boards apart

Construction Crossword

Construction Crossword
Type
Crossword
Description

The joint of two pieces at an angle that bisects the joining angle.
a specialized tool that lets you make cuts at a variety of angles.
a type of bow saw used to cut intricate external shapes and interior cut-outs in woodworking or carpentry.
diagram which shows the buildings, utility runs, and equipment layout, the position of roads, and other constructions of an existing or proposed project site at a defined scale
a length of tape or thin flexible metal, marked at intervals for measuring.
a circular saw mounted under a table or bench so that the blade projects up through a slot
a power tool with a shaped cutter, used in carpentry for making grooves for joints, decorative moldings, etc.
are both cutting and holding pliers used by artisans, jewellery designers, electricians, network engineers and other tradesmen to bend, re-position and snip wire.
a type of board made from plaster, wood pulp, or other material, used especially to form the interior walls of houses.
an imperial unit and U.S. customary unit (non-SI, non-metric) of area, used mainly in the United States
a characteristic always needed for safety
the way your work area needs to be
something you always need to have on in work area
this is never allowed in work area
never allowed in construction area

WOOD SHOP Crossword

WOOD SHOP Crossword
Type
Crossword
Description

Cutting wood across the grain
Cutting wood with the grain
Always think _____ before performing an operation.
_____ must be worn in the shop at all times.
All loose clothing should be _____ .
Keep _____ clean and clear of debris.
Stay _____.
Use a ____ to clean work areas.
Screw drivers are not _____.
Use a _____when using chisels
Every tool has a _____ and should be returned when you are finished using it.
Do not _____ on electrical cords.
Do not _____ to anyone while they are using a machine.
Never _____ someone while they are working in the shop.
_____ toed shoes should be worn when working in the shop.
_____ the electrical connection before working on a piece of equipment.
Help _____ safety in the shop.
_____ and rough behavior will not be permitted in the shop.
_____ all injuries, no matter how small.
Lift with your _____ not your back.
Do not set _____ powers tools down while they are still running.
I have to earn a 100 _____ on each safety test.
Skills _____ is the club that represents the wood shop
A _____ square is used to layout stairs and rafters.
_____ plane is the longest planner.
The _____ plane is the smallest planner.