Welding CrossWord

A linear rupture of metal under stress
A groove melted into the base metal adjacent to the weld toe
Cavity type discontinuities formed by gas entrapment during solidification
The protrusion of weld beyond the weld toe or weld root.
Visible root reinforcement produced in a joint welded from one side
The distance from the joint root to the toe of the weld
Visible evidence that indicates a discontinuity may be present
A form of weld undercut at the end of welded members that are 1/4 inch or less.
Weld metal deposited for the purpose of corrosion protection or heat resistance.
A narrow opening between two pieces of metal in which liquids or particles can be trapped.
A form of weld undercut which occurs at the corner of welded members.
An interruption of the typical structure of a metal that affects its mechanical, metallurgical, or physical characteristics.
The maximum distance from the face of a convex fillet weld perpendicular to a line joining the weld toes.
Any localized heat-affected zone or change in the surface of the finished weld or adjacent base material resulting from an arc.
The condition of a weld without any surface modifications.
A non-metallic solid material adhering to, or entrapped between beads of weld metal.
The exposed surface of a weld on the side from which welding was done.
A condition in which the weld face extends below the adjacent surface of the base material.
Weld applied to seal-off a fillet weld at the end of a member.